SECOND HAND,   *** TOP MACHINES ***

CARRIAGE FOR LOG SAW TYPE SPIDER
Length 7.50 m, equipped with 4 independent headblocks, opening 1060 mm, movable in two chromed ways 120 mm, lubrication centralized of columns and of sliding guides of claws with oil level mark, impact absorbers on each headblock with adjustable alignment of headblock, triplex chain feeding, 4 pneumatic claws opening 800 mm, opening and closing of gripping centralized, double pressure of gripping driven from consol, 4 logs-turners, 21 meters of rail, wheelbase of rails 1600 mm, pantograph, consol with central chair for the operator.
HEADRIG TYPE XBE140
Hydraulic blade-pressure and double electric blade-guide, flywheels diameter mm 1400, flywheel face mm 185, maximum height under blade-guide 1300 mm, protection carter, lower and higher pressure blade-guide, engraving disc for bark cleaning.
FEEDING MOTOR XBE140
100 hp power, star-delta starter, pulleys, belts.
HAULAGE TRANSVERSAL CHAIN  TYPE 400
Frame and metal base, chain pitch 125 mm, 3 chains, length 6 m, with 3 arms singulator with pneumatic drive.
UNLOAD ROLLER
Length 14 m, equipped with 24 rolls diameter 194, width 1000, drive motor 3 HP, chains of recharging half los 4 arms.
21 M RAIL AND PANTOGRAPH for carriage
CABLE FEEDING TYPE STATIC WARD
Bidirectional, power DC motor 37 HP, power output 70 hp winch at ground, pneumatic braking emergency.
UNLOAD ROLLERS
Length 14 m, equipped with 24 rolls diameter 194, width 1000 mm, metal falling, 1 drop motor of 3 HP, 4 arm chain-up half log
21 M RAIL  AND ROUTER FOR CARRIAGE
CABLE FEEDING  TYPE WARD STATIC
Bi-directional, DC motor power 37 hp, 70 hp power developed at the winch, winch down, pneumatic braking device.
Machines in current good conditions
 
MORE PRACTICAL INFORMATION:

Carriage: 4 headblocks with independent motor; possibility to action only 2, alignment  of the log, 4 flippers reversers of the board, displacement on cylinders, fast movement, the carriage is very detailed. Weight 100 q
Band saw: Length of the blade 9,40 – width cm 20,5 – In front of the blade position there has been modified an engraver for cleaning the bark and protection of blade.
Mechanization: Railway width meters 1,60, then very steady; little square of picking-up the half-logs and putting on the carriage at 4 chains; 2 exits for different thickness, 3rd exit for slabs in the pick-up square. Log returner device. Tanks for lubrication
Computer
The installation is suitable of all kinds of wood. Wood cut from the user is toulipier, African mahogany, iroko, padouk, poplar, ash, chestnut, Siberian larch,…
Hours worked at February 2010 : nr. 6.458

www.bardimacchine.com