• Max. operating field strokes: X-Axis is 2,880 mm (112.2 in.), Y-axis is 1,250 mm (41.7 in.), and Z-axis stroke is 170 mm (6.7 in.); max. positioning speed on the X-axis is 262 FPM, 230 FPM on the Y-axis and 49 FPM on Z-axis; Y-axis reach of router 48 in.

 

• Equipped with: 10-Tool ATC tool changer, "TF 12+6" Boring head with (12) independently selectable vertical spindles for face boring, driven by an inverter controlled 3 HP motor; (5) of the spindles are in the Y-axis & (7) spindles are in the X-axis (one shared spindle in X-/Y-axis).

 

• Additionally equipped with: (2) Horizontal boring units, two (1 + 1) opposing spindles in X-axis for boring right & left sides, and one (1 + 1) opposing spindles in Y-axis for edge boring front & rear of panel. - Integrated saw (grooving) for X-axis operation with 120 mm saw blade.

 

• (1) 10 HP ISO-30 electro spindle router (0 - 18,000 RPM), router is driven by an 7.5 kW digital inverter, with RH or LH rotation.

 

• Worktable with: (6) Pneumatically locking panel supports, all w/digital readouts; the vacuum rails are equipped with a total of (12) MATRIX style vacuum cups (6) are 88 x 155 mm and (6) are 162 x 155 mm.

 

• (6) Pneumatic backstops, material stops for (4) working areas in Y-axis, jig locking device on (2) work areas.

 

• Personal Computer system: 15 in. Color monitor, 3-1/2 in. floppy & 8.4 GB hard disk system, 32X CD ROM, 64 MB RAM, and (2) I/F serial ports, integrated modem, Ethernet card.

 

• The PC system frontend runs "GENESIS" numerical control to manage programming & operation software (Windows NT, 32-bit operative system), all built into a protective cabinet enclosure.

 

• Software is continuously online providing real-time information on tool position & error messages, visualization of RPM, current load meter, and more; positioning of panel supports and vacuum cups.

 

• Software features: Automatic generation of G & M code, stop & restart, machine diagnostics, automatic optimization, and full graphic display with the possibility to associate up to (11) parameters and programming of up to (2,000) work lines per single program.

 

• Includes: Front safety mats that will instantly place machine in "Pause Cycle" when operator steps onto the mats.

 

• 100 cbm/Hr DEKKER Vacuum Pump System - [Ref. BP-280384]

 

A lot of machine & equipment value for the money!

 

FOB – Southwest USA

Very Good Condition

USD $36,000